The system has been designed by the project to detect defects generated by corrosion in oil and gas installations. The components...
It will be held on 23 and 24 April and free registration is now open. CIDETEC Surface Engineering will host a workshop on...
The SURPASS project is working on polymeric materials that will replace metal parts used in the railway sector, thus reducing CO2 emissions.
CIDETEC Surface Engineering is participating in the project that will research and develop a unique digital model for structural...
Using dynamic chemistry, CIDETEC Surface Engineering will develop resin-impregnated carbon fibres for use in the production...
The device will serve to develop hydrogen transport, distribution and storage This new glow discharge optical emission spectrometer...
CIDETEC Surface Engineering's U-CROSS project has developed a preventive corrosion detection system based on the Acoustic...
Thanks to the development of water-repellent cement, dirt-repellent glass, and building-integrated solar cells, the I-climabuilt...
We are happy to announce the start of CUBIC, a research & innovation project funded by Circular Bio-based Europe Joint...
CIDETEC Surface Engineering's 3R epoxy resin will serve to support the digital transformation of the next generation of aircraft.
The spontaneous growth of tin filaments (whiskers) on the surfaces of electronic devices compromises the success of ESA's space missions.
The largest annual event on environmental policies in Europe, which took place from the 3rd to the 11th of June 2023.
CIDETEC Surface Engineering has strengthened its position with the acquisition of equipment for the development of sustainable...
On May 11th and 12th CIDETEC Surface Engineering hosted the NDTCorr 2023 workshop in San Sebastian. NDTCorr workshop...
CIDETEC Surface Engineering coordinates this project that will build a demonstration plant for the treatment and recovery...
CIDETEC Surface Engineering has installed a new surface treatment pilot plant equipped with a PLC, allowing it to centralise...
The Z-WasTEK project has achieved its goal by developing multiple demonstrators that enable carbon fibre to be recycled from...
REFORM will transform the printed electronics industry to make it environmentally sustainable. Technological progress...
BIO-UPTAKE and SURE2COAT, aligned with the circular economy and smart manufacturing The objective of the European Union...
CIDETEC Surface Engineering invites you to participate in this Open Call, open until January 30. Are you interested in funding...
The research project LUBGEAR is generating the knowledge necessary to understand the behaviour of gears working under extreme...
CIDETEC Surface Engineering is coordinating this project, which will build a demonstration plant to treat and recover feathers...
CIDETEC Surface Engineering's experience with 3R composites will enable the development of an eco-efficient manufacturing strategy.
The television programme carried out an experiment with the centre's self-repairing material Last 27th September, CIDETEC...
The AIRPOXY project emerged in 2018 with a view to addressing a series of challenges around remaining at the forefront of...
The SURPASS project will establish the transition to safer, more sustainable, and recyclable polymeric materials for the...
The MC4 project, in which CIDETEC Surface Engineering participates, will establish processes to achieve 60% recyclability...
CIDETEC participates in two new projects funded by the European Commission focused on new materials for hydrogen storage...
A working day on the AIRPOXY project organised by CIDETEC Surface Engineering was held at Hotel Arima in Gipuzkoa Science...
Last May, CIDETEC Surface Engineering hosted the first face-to-face meeting of the UNLOCK project, which aims to produce...
These formulations, which are more sustainable than those currently available, will protect surfaces against corrosion, reduce...
The H2Free project will develop a degassing model, which aims to be a key tool to substitute the toxic metal cadmium by zinc-nickel Metals...
CIDETEC Surface Engineering has added a new multi-parametric analysis system for galvanic electrolytes (Metrohm Process Analytics)...
On April 27, CIDETEC and CDTI organize a seminar in which, in addition to the CDTI Aid Instruments, the results will be presented...
The research centre will continue to be the technology partner of the manufacturer of aesthetic and functional assemblies...
The Frontiers 2021 project will open up new R&D avenues With the surge of interest in protection against pathogens...
THERMALASER project "THERMAlly sprayed and LASER sintered ceramic coatings to protect steel structures" was launched on November 1, 2021.
Current Business Development Manager at CIDETEC Surface Engineering, he replaces Josep Maria Simó Consola in the position José...
The chair has won an award at the prestigious German Design Awards On the road to a more sustainable industry, the...
The second issue of the AIRPOXY project newsletter has been published. In addition to coordinating the...
The U-CROSS project enables monitored displays to launch exposure testing under real atmospheric conditions. The U-CROSS...
The STELLAR project is making progress in the development of new solutions to reduce drag and fuel consumption in aircraft.
For three years, multifunctional TEG-enabled structural composite materials have been developed for the Aeronautics sector.
The Z-WasTEK project aims to reuse carbon fibre composites and 3R resin: repairable, recyclable and sustainable Researchers...
The REINTEGRA project is one year into its goal of recycling light Al-Li alloys from aircraft. The constant growth of the...
The AMANECO project is investigating a process to reduce roughness on aircraft heat exchangers, whose complex geometry is...
The I-climabuilt project will develop materials and technical systems for building envelopes that will bring us closer to...
UNLOCK project, coordinated by CIDETEC Surface Engineering, work to transform waste from the poultry industry into bio-based...
The San Sebastián-based centre has three active projects making it strategic in improving the capacity of the national industrial fabric.
The AIRPOXY project develops a new family of reprocessable, repairable and recyclable thermostable composites The AIRPOXY...
The H2Free project will develop a degassing model, which aims to be a key tool to substitute the toxic metal cadmium by zinc-nickel Ultra-high...
HARVEST held its penultimate project meeting for month 30 on 11 February 2021. The meeting took place online, given...
The LUBGEAR project will generate the knowledge necessary to design lighter and more efficient gear and lubrication systems...
CIDETEC will actively participate in the INN-PRESSME project The packaging, automotive, and other consumer goods industries have received EUR 14.
Cidetec Surface Engineering is currently developing a new material for the aeronautical and energy industry that will enable...
The aim is to develop multifunctional structural composite materials suitable for thermoelectric power generation (TEG) Two...
CIDETEC is glad to present a new H2020 project Carbo4Power:“New generation of offshore turbine blades with intelligent...
The ECOXY project ends after three and a half years of research.A conference at the headquarters of the Zaragoza Aitiip Technology...
3R technology (patented in 2014) develops more competitive and sustainable thermoset composite materials thanks to the re-processability,...
Surface Engineering brings together a series of advanced technologies with widespread applications in the industrial world.
Due to the extraordinary conditions caused by the outbreak of the Corona virus, the 1st review meeting of HARVEST was held...
MetalMadrid is the leading annual industrial show tailored to meet the needs of today´s advanced manufacturers and suppliers.
CIDETEC, the project coordinator, hosted the final meeting of the KaRMA2020 project in San Sebastian (SPAIN) from 28th to...
The month 30 meeting of the ECOXY European project, coordinated by Cidetec, took place on 20 and 21 November at the Aitiip premises in Zaragoza.
The “II Plastic Congress. S3: Safe, Smart and Sustainable”, organised by Aitiip and Plastipolis, was held on...
CIDETEC is one of the organisations that form part of the STELLAR project consortium, which falls within the Clean Sky 2 programme.
The meeting to kick-off the AMANECO project (ASSESSMENT OF ADDITIVE MANUFACTURING LIMITS FOR ECO-DESIGN OPTIMIZATION IN HEAT...
The European composites, plastics and polymer processing platform (ECP4) has chosen Elena Jubete from CIDETEC Surface Engineering...
On November 6 and 7, CIDETEC Surface Engineering brought together leading experts in post-processing technologies for materials...
TRU-REPLACE “Trustful and eco-friendly replacement to hexavalent hard chrome“ European project was started on November 1st.
The GREEN INSTRUCT Project Consortium celebrated its M37 meeting, last 22nd and 23rd October, hosted by STRESS, in Naples...
The launch meeting of the U-CROSS project, led by CIDETEC, took place on October 10 at the Dassault Aviation facilities in Paris.
The seminar on "Inspection of surface cleaning of parts during the production process" organised by Neurtek and CIDETEC Surface...
The HARVEST project M12 meeting took place in Athens (Greece) at National Center for Scientific Research “Demokritos”...
The final Shift2Rail event of the PIVOT, Mat4Rail, Run2Rail and FairStations projects was held in Paris on 17 September....
Eurocorr , the EFC’s annual conference focused in corrosion science was held in Seville (Spain) on September 9-13....
The AIRPOXY partners met for the M12 consortium meeting and General Assembly at the National Center for Scientific Research...
The 9th EASN International Conference on “Innovation in Aviation & Space” took place in Athens, Greece from...
The EUROMAT congress was held from 1 - 5 of September in Stockholm, Sweden. EUROMAT is the premier international congress...
The course, organised by HEGAN - Basque Aerospace Cluster and CIDETEC, will cover the most commonly-used non-destructive...
On 6 and 7 November 2019, in San Sebastian, CIDETEC Surface Engineering will bring together the main experts on post-processing...
The European ECOLAND project consortium held its project development meeting for month 17 on 17 July at CIDETEC Surface Engineering.
The KaRMA2020 project M30 meeting took place in Willich (Germany) at FKuR’s facilities on July 4th, 2019. This project,...
The month 33 meeting of the GREEN INSTRUCT project took place in SEVILLA, hosted by ACCIONA, on 26 and 27 of June 2019. Representatives...
CIDETEC Surface Engineering had an outstanding participation in the Subcontratación’19 Fair held at the Bilbao...
Registration to attend Postadditive'19, the Conference on Postprocessing Technologies in Additive Manufacturing is open on the website www.
Yolanda Alesanco, from CIDETEC Surface Engineering, has been one of the winners of the Extraordinary Doctorate Prize awarded...
The award ceremony of the eighth edition of the "MAIER S. COOP International Design Contest" took place on June 28 at the...
Last 5 June saw the holding of the seminar, “Effects of the REACH Standard on Surface Treatments towards a More Sustainable...
The "Electrochemical methods for the characterisation and evaluation of corrosion" seminar, organised jointly by CIDETEC...
Representing CIDETEC Surface Engineering, Eva García Lecina and Germán Cabañero attended the Automotive...
The IntAIRCOAT conference is a biannual event of major interest for learning about the trends set by large aeronautical OEMs...
HABIC, the Basque Country Equipment, Wood and Design Cluster, brings together the main companies in the sector that operate...
The seminar, co-organised by CIDETEC Surface Engineering and Fischer, was aimed mainly at managers in the areas of quality,...
The month 12 meeting of the CHOPIN project was hosted by CIDETEC during March 2019. The event was attended by representatives...
The meeting held during the 24th month of the ECOXY project took place in Karlsruhe on 14- 5 May. The meeting took place...
Last April CIDETEC attended the Advanced Factories Trade Fair in Barcelona where it presented the challenges and opportunities...
The technical seminar entitled "Polishing / ionic bombardment", organised by CIDETEC Surface Engineering and LEICA Microsystems,...
On 24 April, Corrosion Awareness Day is celebrated around the world in order to raise public awareness of a factor that has...
The Clean Sky 2 event was held a two-day high-level conference on 9-10 April 2019 in Brussels, focusing on aeronautics research...
On 26 and 28 February, follow-up meetings were held in Brussels for the European projects Ecoxy and Recysite. Cidetec is...
The workshop was held on March 24 and 25 at tehe Technological Park of Boecillo, in the Spanish town of Valladolid. The main...
The monitoring meeting of the ECO-PROTECT project "Development of environmentally sustainable treatments for the protection...
The Mat4Rail project, part of the Horizon 2020 programme and funded under the Shift2Rail Joint Undertaking, held its first...
The consortium meeting of the HARVEST Project, now in its sixth month of development, was held on February 20 and 21 at the...
CIDETEC Surface Engineering has recently taken part in the latest COST Action e-MINDS workshop, in which CIDETEC participated...
The European INNPAPER project consortium met in Brussels on 5 and 6 February for the six-monthly monitoring meeting and the...
The KaRMA2020 project coordinated by CIDETEC has reached its final year. The project, which has already been running for...
Dr Eva García-Lecina, CIDETEC Surface Engineering director, was interviewed by European Coatings magazine regarding...
At the recent “Automotive Surfaces: Advances in Decorative and Functional Automotive Surfaces” symposium held...
The seminar, “Analytic Bath and Additive Control Techniques”, took place at CIDETEC on 22 November. This eminently...
29 NOVEMBER saw the gathering of the Hazitek FUNCIONA 4 consortium on the subject, “Customised-function Products through...
On 21 November, the innovation committee of HEGAN – the Basque Country aeronautics and space cluster, of which CIDETEC...
The meeting of the HAZITEK R-COMPOSITES 4.0. Project Consortium took place on 22 November at CIDETEC Surface Engineeringinstallations.
The so-called lithium triangle covers a vast South American region including north of Chile, south of Bolivia and northwest...
Every year in October, Dutch Design Week (DDW) is held in the Dutch city of Eindhoven. This is the biggest design event in...
El próximo 22 de Noviembre vamos a realizar un seminario en CIDETEC sobre técnicas analíticas de control...
The AIAS institutional visit to the new CIDETEC Surface Engineering installations took place last 25 October. Josep M. Simó,...
The European Committee for Surface Treatment (CETS) has called on the European Commission to grant authorisations for the...
On October 18, the Midterm event of the PIVOT project, Performance Improvement for Vehicles On Track, was held at the Maison...
The Chopin Project consortium meeting for the 6th month of activity was held in Bremen (Germany) on 25 September. The advances...
HARVEST project was launched at the International Centre of Hellenic Education Culture & Vocational Training D.I.K.E.
Six brand new material prototypes comprised of new, recycled and recyclable apparel and automotive materials and concepts...
On 27-29 August, the final workshop and closing meeting of the SELECTA Project (“Smart ELECTrodeposited Alloys for...
The kick off meeting of the AIRPOXY project took place at CIDETEC on 5th and 6th of September. The AIRPOXY project, funded...
The launch meeting for the ECO-PROTECT project, “Development of an ECO-friendly PROTECTion for aerospace aluminium...
The meeting to close the SEALANT project, “Optimisation of the sealing process in sulphuric acid anodising treatments...
Last 14 June, CIDETEC Surface Engineering visited the Autonomous University of Barcelona (UAB), more specifically the Smart...
The event included EAST FORUM 2018, the annual meeting of the European Academy of Surface Technology. Organised by CIDETEC...
On 19th and 20th of June, CIDETEC Surface Engineering hosted the CARBODY collaborative workshop between Mat4Rail...
The manufacturer of semi-finished chemical products for surface treatment visited the new facilities on 25 May for the purpose...
The past 14th of May the opening of the biannual 2018 Spring edition of the Baltic Conference Series (BCS) was celebrated,...
Dr. Timothy Hall, researcher at the American company Faraday Technology, visited CIDETEC Surface Engineering's new facilities on 21 May.
LIEBHERR-AEROSPACE Lindenberg GmbH visited CIDETEC Surface Engineering for the launching of the ECOLAND project, “Development...
Eric Santkin, Economic and Commercial Councillor of Wallonia, visited CIDETEC Surface Engineering installations last 15 March.
INNPAPER project partners met in San Sebastián on 17 and 18 January to coordinate the first steps for this three-and-a-halfyear-long...
CIDETEC Surface Engineering participated in the Bio-based Industries (BBI) Stakeholder Forum held last 6th and 7th of December in Brussels.
The conference, organized by Plastics News Europe, was focused on the newest automotive interior and electronics innovations.
The 2017 edition of Eurosurfas, held in Barcelona from 2 to 6 October, occupied over 2,000 m2with 62 exhibitors, who...
CIDETEC strengthens its position in the aeronautic sector with the NADCAP non-destructive testing (NDT) accreditation. This...
The regular meeting to monitor the LORCENIS Project was held at the installations of the Scientific and Technological Park...
From 4th-5th October 2017, CIDETEC has hosted the Mat4Rail Kick-off meeting in San Sebastián, a project funded through...
The launch of the HAZITEK Project FUNCONA4 took place on the 9th of February at the ORBEA facilities in Mallabia: Products...
Works are starting on the grounds where the headquarters of the Surface Engineering area of CIDETEC will be built.The building...
KERA-COAT presented its latest developments at the NACE-Corrosion 2016 International Conference, a key meeting point for...
CATEC hosted the final meeting of the INLIGHT project on 29 October CIDETEC has been coordinating Europe’s INLIGHT...
CIDETEC will be speaking at the Technical Conference on Pre-treatments and Industrial Finishes. On Wednesday 27 May, as...
The use of chemometric methods to study and optimise pulse electrodeposition processes is one of the innovations of the paper In...
CIDETEC presented its capabilities and latest developments at the 9th edition of the aviation industry’s leading trade...
CIDETEC be present at the 9th edition of AIRTEC, a reference fair in the aerospace industry, to be held in Frankfurt from 28 to 30 October 2014.
BYEFOULING project representatives met at CIDETEC to present the results of the first stage of the project On the 27th and...
CIDETEC and AIAS are organizing a Technical Seminar on Tribological Coatings during BIEMH 2014 Exhibition. As part of the...
See more