Este sitio web utiliza Cookies propias para recopilar información con la finalidad de mejorar nuestros servicios, así como el análisis de sus hábitos de navegación. Si continúa navegando, supone la aceptación de la instalación de las mismas. El usuario tiene la posibilidad de configurar su navegador pudiendo, si así lo desea, impedir que sean instaladas en su disco duro, aunque deberá tener en cuenta que dicha acción podrá ocasionar dificultades de navegación de página web.

Cómo configurar

Development of ECO-friendly protection procedures for LANDing gear aluminium alloys

This project has received funding from the Clean Sky 2 Joint Undertaking under the European Union’s Horizon 2020 research and innovation programme under grant agreement No 785412.

This project contributes to Eco Design Transversal Activity

Total budget: 347.000,00 €

Duration: 2018/03/01 - 2020/01/31


In this project the main goal is the development of an alternative treatment to Cr(VI) anodising that is based on an anaphoretic electrocoating or “E-coat” process that meets REACH standards. Anaphoretic electrocoating consists of applying an organic coating anodically by immersion using electric current. It has the advantage of enabling painting without the need for preliminary priming.

This makes it doubly interesting since it facilitates the reduction of application time (reducing production time by about 55 %) while replacing with a single coat, two layers that usually contain Cr(VI), such as those produced by chromic anodising and primers currently in use, will be prohibited starting in 2024 to meet European REACH regulations.

The treatment developed in the course of the project will be mainly applied to series 7000 aluminium alloys, very often used in aerospace applications for their mechanical strength. The treatment improvement is expected to lengthen the useful life of the components treated by 25 % in comparison with traditional anodised and painted systems and to reduce manufacturing costs by at least 30 %. Moreover,thanks to the new coating system, parts of more complex geometries can be treated, making it possible to design lighter landing gear components.

The following improvements will be aimed from the ECOLAND Cr-free project:

• The lifetime of the anaphoretic electrocoating system shall be 25 % longer than the lifetime of traditional.
• It is expected a minimum of around 30% cost and 45% energy consumption reduction in manufacturing compared to currently available systems.
• Thanks to the new coating systems more complex geometry parts could be coated and so landing gears might be designed lighter than currently ones. It will be measured through a throwing power (capacity to coat hidden areas) experiment where we will search to increase it by 10%.
• The production time to be shortened in a 55 %.
• A decrease of the risk of mechanical failure due to the reduction of the alloy exposure time to acids. It will be measured by means of a fatigue test where a 10 % reduction is foreseen.
• The adherence of paint over anaphoretic e-coat shall be higher than over standard anodizing. It will be measured indirectly by means of a stone-chip test over the top-coat. The result shall be a 10 % better than over anodising.
• The process will be Cr-free and VOCs emissions will be reduced by 50%.



ECOLAND is about developing a suitable REACH compliant anaphoretic electrocoating (E-coat)treatment (including both the optimal pretreatment method and E-coat application conditions) that can replace the currently used Cr(VI)-based anodising + painting treatment for protection of Al 7000 series alloys in aeronautic applications. Decreases in material use, production time and environment impact and costs are intended at the same time as increases in corrosion resistance and service life.


To achieve the proposed challenges, the ECOLAND project brings together a strong consortium composed of three different partners with complementary profiles and large expertise, covering the special skills, capabilities and certification expected for the project and an industrial advisor.

This project spearheaded by CIDETEC, which is a research centre with a strong scientific background and expert in surface treatment processes, dispersions and polymer modification, CIDETEC (Spain), also relies on the participation of a strongly consolidated company in the field of anaphoretic coatings, LVH Coatings (UK) and a NADCAP qualified company for aeronautical testing and validation with a wide experience in chemical and physical testing of protective coatings for Al, CTME (Spain). CTME has also extensive experience in performing LCA studies in different sectors, including aerospace sector (CleanSky TIFAN and CleanSky SEALANT, in both projects LIEBHERR acting as TM).

It is worth to mention that the industrial advisor of ECOLAND is the outstanding chemical company CHEMETALL, which is leader in providing chemical products for surface treatments to aeronautical industries all over Europe. Besides, recently, the company has been acquired by BASF, which also provides products for surface treatments, including e-coating formulations.




Dr. Jorge Rodríguez (Project Coordinator) - CIDETEC   
Business Development Manager
NDT Level 3

Dr. Rosalina Pérez - CIDETEC
Researcher - Surface Engineering