Led by CIDETEC Energy Storage, he initiative has been focused on developing a tool to improve the understanding of cell behavior...
Thanks to the development of water-repellent cement, dirt-repellent glass, and building-integrated solar cells, the I-climabuilt...
We are happy to announce the start of CUBIC, a research & innovation project funded by Circular Bio-based Europe Joint...
CIDETEC Energy Storage participated project aims to reach Graphite Resilience For lithium-Ion battery anodes through a sustainable...
CIDETEC Surface Engineering's 3R epoxy resin will serve to support the digital transformation of the next generation of aircraft.
The spontaneous growth of tin filaments (whiskers) on the surfaces of electronic devices compromises the success of ESA's space missions.
The industry's leading European stakeholders are coming together in San Sebastián to define the foundations for an...
CIDETEC is currently working on a programme targeted at transforming the economics of electric and connected vehicles. Based...
The largest annual event on environmental policies in Europe, which took place from the 3rd to the 11th of June 2023.
CIDETEC Surface Engineering has strengthened its position with the acquisition of equipment for the development of sustainable...
These awards recognise the contribution of individuals and organisations to standardisation. More than 13,000 experts from...
The project led by CIDETEC Energy Storage has published an article in the third most influential energy journal in the field...
On May 11th and 12th CIDETEC Surface Engineering hosted the NDTCorr 2023 workshop in San Sebastian. NDTCorr workshop...
CIDETEC Surface Engineering coordinates this project that will build a demonstration plant for the treatment and recovery...
CIDETEC Energy Storage will work on the batteries for these heavy vehicles, which have a range of up to 750 km and are expected...
Europe is making a great effort to adapt to the requirements of new mobility and energy efficiency. A substantial number...
CIDETEC Energy Storage will contribute its knowledge in characterization and modelling of battery-packs to achieve the decarbonization of the sector.
CIDETEC Surface Engineering has installed a new surface treatment pilot plant equipped with a PLC, allowing it to centralise...
The Z-WasTEK project has achieved its goal by developing multiple demonstrators that enable carbon fibre to be recycled from...
The word órdago meaning “here it is”, is the expression used by players in the Basque card game “mus”...
REFORM will transform the printed electronics industry to make it environmentally sustainable. Technological progress...
International research team sets out to develop a smart, multifunctional, and cost-effective 3D-printed wound dressing A...
BIO-UPTAKE and SURE2COAT, aligned with the circular economy and smart manufacturing The objective of the European Union...
The Department of the Environment of the Provincial Council of Gipuzkoa, through the Foundation for the fight against Climate...
The largest industrial project in the history of Spain has 52 partners that will develop 86 projects to contribute to the...
Twenty-four Basque organisations will jointly organise the 7th edition of Emakumeak Zientzian following the signing of a new collaboration agreement.
CIDETEC Surface Engineering invites you to participate in this Open Call, open until January 30. Are you interested in funding...
Veinticuatro entidades vascas organizarán conjuntamente la 7.ª edición de Emakumeak Zientzian tras la...
The research project LUBGEAR is generating the knowledge necessary to understand the behaviour of gears working under extreme...
The EKARRIH2 project, in which CIDETEC Energy Storage is participating, aims to address the limitations of the current hydrogen carriers.
CIDETEC Surface Engineering is coordinating this project, which will build a demonstration plant to treat and recover feathers...
CIDETEC Energy Storage boosts its activities in Solid-State Batteries with the inauguration of a dedicated state-of-the-art...
4,4M€ in revenues for a significant step forward in battery technology and application development. In the second half...
CIDETEC Surface Engineering's experience with 3R composites will enable the development of an eco-efficient manufacturing strategy.
Event organized by the Karlsruhe Institute of Technology (KIT) in collaboration with the European Project E-MAGIC coordinated...
CideMOD is available in GitHub, being the first tool of its kind to solve the behaviour of cells in three dimensions Understanding...
The new facility, part of MUBIL Hub, will double the space available to CIDETEC Energy Storage to 7000 sqmWith investment totalling 18.
The television programme carried out an experiment with the centre's self-repairing material Last 27th September, CIDETEC...
The AIRPOXY project emerged in 2018 with a view to addressing a series of challenges around remaining at the forefront of...
The SURPASS project will establish the transition to safer, more sustainable, and recyclable polymeric materials for the...
The MC4 project, in which CIDETEC Surface Engineering participates, will establish processes to achieve 60% recyclability...
CIDETEC participates in two new projects funded by the European Commission focused on new materials for hydrogen storage...
A working day on the AIRPOXY project organised by CIDETEC Surface Engineering was held at Hotel Arima in Gipuzkoa Science...
More than 10,000 people attended Europe's main battery forum CIDETEC Energy Storage could not be absent from Europe's...
Last May, CIDETEC Surface Engineering hosted the first face-to-face meeting of the UNLOCK project, which aims to produce...
A private event was held in Tabakalera to thank employees for their efforts over the past 25 years, and to set out the guidelines...
These formulations, which are more sustainable than those currently available, will protect surfaces against corrosion, reduce...
Tackling the pressing need for effective and economical osteoarthritis treatments Donostia-San Sebastián,...
The Irizar Group presented on Tuesday its project 'Technological training and industrial development of the bus value chain...
The H2Free project will develop a degassing model, which aims to be a key tool to substitute the toxic metal cadmium by zinc-nickel Metals...
- Led by the Volkswagen Group and SEAT S.A., the project comprises 62 companies, 61% of them SMEs, from 11 regions.- It is...
Ficoba became the epicentre of electromobility in Southern Europe CIDETEC Energy Storage did not miss its appointment...
CIDETEC Surface Engineering has added a new multi-parametric analysis system for galvanic electrolytes (Metrohm Process Analytics)...
On April 27, CIDETEC and CDTI organize a seminar in which, in addition to the CDTI Aid Instruments, the results will be presented...
The research centre will continue to be the technology partner of the manufacturer of aesthetic and functional assemblies...
It is the leading private centre in the Basque Country in terms of returns per researcher and the sixth with the most collaborative...
The event brings together 65 European projects on 29-30 March in Brussels. The 5th edition of the European Conference...
The Frontiers 2021 project will open up new R&D avenues With the surge of interest in protection against pathogens...
THERMALASER project "THERMAlly sprayed and LASER sintered ceramic coatings to protect steel structures" was launched on November 1, 2021.
The organisation achieved a record income in 2021 and faces the future with the expectation of doubling its activity over the next five years.
The H2BASQUE project is developing a prototype for the generation of green hydrogen using PEM electrolysis. At a time when...
Current Business Development Manager at CIDETEC Surface Engineering, he replaces Josep Maria Simó Consola in the position José...
At the 2nd MONDRAGON UNIVERSITY SCIENTIFIC MEETING ON BATTERY-BASED ENERGY STORAGE SYSTEMS, the different digitalisation...
The chair has won an award at the prestigious German Design Awards On the road to a more sustainable industry, the...
With a fundamentally educational purpose, the Spanish Association of Automotive Suppliers (SERNAUTO) has created a two-dimensional...
The Spanish Federation of Technology Centres currently includes 42 centres. Last December, the 54th Ordinary General...
The tool is available on Github, the world’s largest software co-development platform. Its main functionalities...
Medical device development, from conception to timely release to market, can be expensive and risky. This is particularly...
The European funded project, i-HeCoBatt (Grant Agreement No 824300), developing a smart, cost bursting industrial battery...
The electrification of the economy is advancing steadily. This in turn leads to an acceleration in the launch onto the market...
- The SHYNE (Spanish Hydrogen Network) project is the largest...
The benchmark battery event in Europe was held, in person, in Stuttgart Two years later, CIDETEC Energy Storage...
The BIG-MAP project, in which 32 partners are participating, has a budget of €20M. Immediacy has become one of the...
The second issue of the AIRPOXY project newsletter has been published. In addition to coordinating the...
The event aims to become a European benchmark for battery research and innovation. Battery Innovation Days, the...
The U-CROSS project enables monitored displays to launch exposure testing under real atmospheric conditions. The U-CROSS...
The ALBATROSS project addresses the needs of European Electric and Hybrid-Electric passenger vehicle market by overcoming...
The SPARTACUS research project as part of the EU research initiative BATTERY 2030+ has now been running for around a year.
On November 30, the benchmark battery event in Europe will start in Stuttgart, face-to-face. After two years in...
The STELLAR project is making progress in the development of new solutions to reduce drag and fuel consumption in aircraft.
With the participation of CIDETEC Energy Storage, the prototypes obtained will make Europe a benchmark in the manufacture of this type of batteries.
For three years, multifunctional TEG-enabled structural composite materials have been developed for the Aeronautics sector.
The Z-WasTEK project aims to reuse carbon fibre composites and 3R resin: repairable, recyclable and sustainable Researchers...
The consortium, led by Volotea, Air Nostrum and Dante Aeronautical, is working to get the first aircraft certified to fly...
The trade show is an international benchmark in the biotech sector and will be held in Pamplona in a hybrid format, a mix of on-site and online.
The MDOT project, which has a budget of more than €8M, develops a platform to take medical product innovations to the clinical evaluation level.
The REINTEGRA project is one year into its goal of recycling light Al-Li alloys from aircraft. The constant growth of the...
The SPARTACUS project aims to reduce battery charging time by 20% with no negative effects on their useful life, using mechanical,...
LiOn-HD has arisen with the aim of facilitating the evolution and transformation of the national industry towards the development...
The AMANECO project is investigating a process to reduce roughness on aircraft heat exchangers, whose complex geometry is...
The I-climabuilt project will develop materials and technical systems for building envelopes that will bring us closer to...
The objective of this association is to turn Europe into a strategic and competitive location at a global scale for the production of batteries.
UNLOCK project, coordinated by CIDETEC Surface Engineering, work to transform waste from the poultry industry into bio-based...
Magnesium has been identified as a promising anode material for the development of rechargeable lithium free...
The session will count with the participation of seven EU-funded projects working on next-generation batteries for EV from...
cmRNAbone proposes a new gene therapy to improve the lives of people with major traumatic injuries or degenerative bone diseases The...
On Tuesday 11 May at 10.00 am, organised by the Cervera ALMAGRID Network of Excellence and with the presence of MITECO and CDTI.
The project reduces the model calibration and validation time by 60%, enabling more efficient electric vehicles. The HiFi-ELEMENTS...
The San Sebastián-based centre has three active projects making it strategic in improving the capacity of the national industrial fabric.
The AIRPOXY project develops a new family of reprocessable, repairable and recyclable thermostable composites The AIRPOXY...
The H2Free project will develop a degassing model, which aims to be a key tool to substitute the toxic metal cadmium by zinc-nickel Ultra-high...
A powertrain test bench, 30 m³ walk-in climatic chambers or vibration tables are just some of the new facilities found...
Novel solid electrolytes based on hybrid block polymers stable to high voltage cathodes will be developed during the PhD project.
El lehendakari, el diputado general de Gipuzkoa y la directora del centro participan en la apertura de la sede provisional,...
HARVEST held its penultimate project meeting for month 30 on 11 February 2021. The meeting took place online, given...
The EXPERT project researches a new platform for nanomedicine release The EXPERT project, in which CIDETEC Nanomedicine...
The charging point at the Repsol service station, located on the N-I as it passes the town of Tolosa in the province of Gipuzkoa,...
The LUBGEAR project will generate the knowledge necessary to design lighter and more efficient gear and lubrication systems...
CIDETEC will actively participate in the INN-PRESSME project The packaging, automotive, and other consumer goods industries have received EUR 14.
These low-cost, high-availability batteries with a low environmental impact will be developed as part of the ZABCAT project.
The platform will steer battery innovation in Europe More than 130 organisations, including CIDETEC, have created the Batteries...
- Replacing Eduardo Junquera.- The group's new Strategic Plan includes investments of more than 30 million. Donostia-San...
Cidetec Surface Engineering is currently developing a new material for the aeronautical and energy industry that will enable...
The aim is to develop multifunctional structural composite materials suitable for thermoelectric power generation (TEG) Two...
CIDETEC is glad to present a new H2020 project Carbo4Power:“New generation of offshore turbine blades with intelligent...
The ECOXY project ends after three and a half years of research.A conference at the headquarters of the Zaragoza Aitiip Technology...
Those chosen will develop the sustainable batteries of the future Europe is immersed in the energy transformation that...
3R technology (patented in 2014) develops more competitive and sustainable thermoset composite materials thanks to the re-processability,...
CIDETEC Surface Engineering and AIMPLAS will present the latest developments in composites and polymer materials in surface...
The HARVEST Project Consortium celebrated its M24 meeting, last 14th and 15th October, organised by University of Ioannina...
Surface Engineering brings together a series of advanced technologies with widespread applications in the industrial world.
CIDETEC ENERGY STORAGE will manage the advanced energy storage laboratory, financing part of the project. As one of Gipuzkoa's...
On 30th June, Elixabete Ayerbe, researcher at CIDETEC Energy Storage, will be speaking at the first Battery Manufacturing...
Óscar Miguel reports in Empresa XXI on the advances of CIDETEC Energy Storage in modeling and simulation tools for...
"ALMAGRID, integration of advanced energy storage technologies for network applications" is the title of the article auyhored...
CoFBAT has had its first General Assembly on 12 May 2020. The meeting took place on an online basis given the current situation,...
Due to the extraordinary conditions caused by the outbreak of the Corona virus, the 1st review meeting of HARVEST was held...
The European large-scale research initiative BATTERY 2030+ presents the long-term research roadmap that outlines the actions...
As part of the Horizon 2020 program, the European Commission is funding the LiPLANET project over the next two years to establish...
The TECNALIA and CIDETEC Energy Storage Technology Centres combine capabilities to develop new technologies and energy applications...
ALMAGRID, Integration of advanced Energy Storage technologies for grid applications, held its launch meeting at CIDETEC's...
On 4th and 5th December 2019, EGVIA, ERTRAC and the European Commission organized the 3rd European Conference on Results...
MetalMadrid is the leading annual industrial show tailored to meet the needs of today´s advanced manufacturers and suppliers.
The European DEFACTO project, coordinated by CIDETEC Energy Storage, will commence on 14 January in San Sebastian with a...
CIDETEC, the project coordinator, hosted the final meeting of the KaRMA2020 project in San Sebastian (SPAIN) from 28th to...
CIDETEC Energy Storage is participating in CoFBAT project “Advanced material solutions for safer and long-lasting...
The month 30 meeting of the ECOXY European project, coordinated by Cidetec, took place on 20 and 21 November at the Aitiip premises in Zaragoza.
The 2nd China-Spain connected and self-contained electric vehicle forum took place in Madrid between 13 - 16 November as...
The “II Plastic Congress. S3: Safe, Smart and Sustainable”, organised by Aitiip and Plastipolis, was held on...
CIDETEC is one of the organisations that form part of the STELLAR project consortium, which falls within the Clean Sky 2 programme.
The meeting to kick-off the AMANECO project (ASSESSMENT OF ADDITIVE MANUFACTURING LIMITS FOR ECO-DESIGN OPTIMIZATION IN HEAT...
The European composites, plastics and polymer processing platform (ECP4) has chosen Elena Jubete from CIDETEC Surface Engineering...
On November 6 and 7, CIDETEC Surface Engineering brought together leading experts in post-processing technologies for materials...
TRU-REPLACE “Trustful and eco-friendly replacement to hexavalent hard chrome“ European project was started on November 1st.
The GREEN INSTRUCT Project Consortium celebrated its M37 meeting, last 22nd and 23rd October, hosted by STRESS, in Naples...
Oscar Miguel, Director of CIDETEC Energy Storage, took part in the round table discussion about the technological solutions...
The European projects iModBatt and GHOST organized a workshop on October 18 at the ARIMA Hotel, near the facilities of CIDETEC Energy...
The launch meeting of the U-CROSS project, led by CIDETEC, took place on October 10 at the Dassault Aviation facilities in Paris.
The seminar on "Inspection of surface cleaning of parts during the production process" organised by Neurtek and CIDETEC Surface...
On Monday 30 September, the First and Founding General Assembly of BatteryPlat was held. BatteryPlat is the technology platform...
The HARVEST project M12 meeting took place in Athens (Greece) at National Center for Scientific Research “Demokritos”...
On 20 September, the seminar on Communication, Dissemination and Exploitation of European Projects was held at CIDETEC, delivered...
The final Shift2Rail event of the PIVOT, Mat4Rail, Run2Rail and FairStations projects was held in Paris on 17 September....
Eurocorr , the EFC’s annual conference focused in corrosion science was held in Seville (Spain) on September 9-13....
The AIRPOXY partners met for the M12 consortium meeting and General Assembly at the National Center for Scientific Research...
The 9th EASN International Conference on “Innovation in Aviation & Space” took place in Athens, Greece from...
The EUROMAT congress was held from 1 - 5 of September in Stockholm, Sweden. EUROMAT is the premier international congress...
The course, organised by HEGAN - Basque Aerospace Cluster and CIDETEC, will cover the most commonly-used non-destructive...
On September 4 the joint workshop “EMIRI-EARPA Battery 2030+” took place in Brussels in which the main lines...
On 6 and 7 November 2019, in San Sebastian, CIDETEC Surface Engineering will bring together the main experts on post-processing...
The European ECOLAND project consortium held its project development meeting for month 17 on 17 July at CIDETEC Surface Engineering.
The KaRMA2020 project M30 meeting took place in Willich (Germany) at FKuR’s facilities on July 4th, 2019. This project,...
The article “Systematic cycle life assessment of a secondary zinc-air battery as a function of the alkaline electrolyte...
Imanol Landa has been one of the winners of the Extraordinary Doctorate Prize awarded by the UPV / EHU Graduate Commission in the area of Sciences.
The month 33 meeting of the GREEN INSTRUCT project took place in SEVILLA, hosted by ACCIONA, on 26 and 27 of June 2019. Representatives...
iModBatt and GHOST H2020 projects will host a Workshop on the 18th of October 2019 at CIDETEC Energy Storage site in San Sebastián, Spain.
CIDETEC Surface Engineering had an outstanding participation in the Subcontratación’19 Fair held at the Bilbao...
Registration to attend Postadditive'19, the Conference on Postprocessing Technologies in Additive Manufacturing is open on the website www.
Yolanda Alesanco, from CIDETEC Surface Engineering, has been one of the winners of the Extraordinary Doctorate Prize awarded...
The award ceremony of the eighth edition of the "MAIER S. COOP International Design Contest" took place on June 28 at the...
The Batteries Europe platform was officially set up on 25 June in Brussels. Batteries Europe is the initiative promoted by...
Last 5 June saw the holding of the seminar, “Effects of the REACH Standard on Surface Treatments towards a More Sustainable...
The "Electrochemical methods for the characterisation and evaluation of corrosion" seminar, organised jointly by CIDETEC...
Representing CIDETEC Surface Engineering, Eva García Lecina and Germán Cabañero attended the Automotive...
The IntAIRCOAT conference is a biannual event of major interest for learning about the trends set by large aeronautical OEMs...
HABIC, the Basque Country Equipment, Wood and Design Cluster, brings together the main companies in the sector that operate...
Maintaining competitiveness in international markets while continuing with research and development (R&D) to bring new...
The seminar, co-organised by CIDETEC Surface Engineering and Fischer, was aimed mainly at managers in the areas of quality,...
The month 12 meeting of the CHOPIN project was hosted by CIDETEC during March 2019. The event was attended by representatives...
On 14 May, a group studying for a Masters in Biomedical Engineering at the University of Navarra visited the CIDETEC Nanomedicine centre.
The meeting held during the 24th month of the ECOXY project took place in Karlsruhe on 14- 5 May. The meeting took place...
The 3rd General Assembly (GA) was organized together with the Review Meeting (RM) on the 9-10th of April 2019, at the Delegation...
Last April CIDETEC attended the Advanced Factories Trade Fair in Barcelona where it presented the challenges and opportunities...
The technical seminar entitled "Polishing / ionic bombardment", organised by CIDETEC Surface Engineering and LEICA Microsystems,...
At the ADDIMAT Board meeting held on 21 March, the decision was taken to approve the admission of CIDETEC as a new member.
The EMISSARY company, a CIDETEC Nanomedicine spin off, had a stand at the trade fair held in Paris from 2 to 4 April. In-cosmetics...
On 11 April, the Board of Directors of ACICAE-Basque Automotive Cluster approved the admission of CIDETEC as a Collaborating Partner.
On 24 April, Corrosion Awareness Day is celebrated around the world in order to raise public awareness of a factor that has...
The Clean Sky 2 event was held a two-day high-level conference on 9-10 April 2019 in Brussels, focusing on aeronautics research...
On 26 and 28 February, follow-up meetings were held in Brussels for the European projects Ecoxy and Recysite. Cidetec is...
The workshop was held on March 24 and 25 at tehe Technological Park of Boecillo, in the Spanish town of Valladolid. The main...
On 25 March, a Colombian delegation visited Cidetec as part of the reciprocal trade mission of businesses and institutional...
The monitoring meeting of the ECO-PROTECT project "Development of environmentally sustainable treatments for the protection...
The CRM Day dedicated to “Transitioning to a low carbon and energy efficient economy: Battery Raw Materials vs CRMs...
The Mat4Rail project, part of the Horizon 2020 programme and funded under the Shift2Rail Joint Undertaking, held its first...
The consortium meeting of the HARVEST Project, now in its sixth month of development, was held on February 20 and 21 at the...
The Battery 2030+ large-scale research initiative will bring together the leading scientists in Europe, as well as the most...
CIDETEC Surface Engineering has recently taken part in the latest COST Action e-MINDS workshop, in which CIDETEC participated...
The European INNPAPER project consortium met in Brussels on 5 and 6 February for the six-monthly monitoring meeting and the...
CIDETEC Nanomedicine organized the Open Innovation Test Beds for the Sanitary Product sector that took place in San Sebastian on February 20.
· The five projects awarded involve a total budget of 30 million euros. · CIDETEC is...
The European i-HeCoBatt project held its launch meeting on 17 January at the CIDETEC Energy Storage headquarters in Donostia-San Sebastián.
A research project in cartilage regeneration, in which the Unit of Biomaterials from the CIDETEC Institute for Nanomedicine...
On 23 January, the eMAGIC consortium met at the CIDETEC headquarters in Donostia-San Sebastián. This international...
The KaRMA2020 project coordinated by CIDETEC has reached its final year. The project, which has already been running for...
Cidetec has been certified for UNE 166002:2014, which validates the adaptation of the centre’s R+D+i management system...
Dr Eva García-Lecina, CIDETEC Surface Engineering director, was interviewed by European Coatings magazine regarding...
At the recent “Automotive Surfaces: Advances in Decorative and Functional Automotive Surfaces” symposium held...
The visit of the EU Programme Directorate and CDTI Territorial Cooperation to CIDETEC took place last 4 December. In the...
The seminar, “Analytic Bath and Additive Control Techniques”, took place at CIDETEC on 22 November. This eminently...
29 NOVEMBER saw the gathering of the Hazitek FUNCIONA 4 consortium on the subject, “Customised-function Products through...
On 21 November, the innovation committee of HEGAN – the Basque Country aeronautics and space cluster, of which CIDETEC...
iModBatt was presented by CIDETEC Energy Storage in the International EV Batteries 2018: Cost-Effective Engineering for Hybrid...
The meeting of the HAZITEK R-COMPOSITES 4.0. Project Consortium took place on 22 November at CIDETEC Surface Engineeringinstallations.
PhDs Hans-Jurgen Grande and Ramón Tena appear on the list of twenty-one researchers honoured on 21 November in acknowledgement...
Safety is a factor that lithium-ion battery manufacturers, integrators and users consider of utmost importance, particularly...
The European ZAS Project aimed to develop electrically rechargeable zinc-air secondary batteries. Despite the fact that the...
CIDETEC Energy Storage coordinates iModBatt project. iModBatt stands for “Industrial Modular Battery Pack Concept Addressing...
The so-called lithium triangle covers a vast South American region including north of Chile, south of Bolivia and northwest...
Every year in October, Dutch Design Week (DDW) is held in the Dutch city of Eindhoven. This is the biggest design event in...
CIDETEC Energy Storage participates in project HIFI-ELEMENTS - “High Fidelity Electric Modelling and Testing”,...
El próximo 22 de Noviembre vamos a realizar un seminario en CIDETEC sobre técnicas analíticas de control...
CIDETEC Energy Storage will participate in the forthcoming conference on “International EV Batteries 2018: Cost-Effective...
The AIAS institutional visit to the new CIDETEC Surface Engineering installations took place last 25 October. Josep M. Simó,...
The European Committee for Surface Treatment (CETS) has called on the European Commission to grant authorisations for the...
On October 18, the Midterm event of the PIVOT project, Performance Improvement for Vehicles On Track, was held at the Maison...
The Chopin Project consortium meeting for the 6th month of activity was held in Bremen (Germany) on 25 September. The advances...
HARVEST project was launched at the International Centre of Hellenic Education Culture & Vocational Training D.I.K.E.
Dr. Aitziber López Elorza, representing CIDETEC Nanomedicine, presented the work "Skin-responsive smart nanocapsules...
Six brand new material prototypes comprised of new, recycled and recyclable apparel and automotive materials and concepts...
CIDETEC Energy Storage will be the guest speaker at the 5th International Workshop on Lithium, Industrial Minerals and Energy...
Last 4 September, the Pepticaps consortium met in Brussels before the European Commission for the final review of the project,...
On 27-29 August, the final workshop and closing meeting of the SELECTA Project (“Smart ELECTrodeposited Alloys for...
The kick off meeting of the AIRPOXY project took place at CIDETEC on 5th and 6th of September. The AIRPOXY project, funded...
CIDETEC Energy Storage will be present at the el 2nd IQPC Workshop on Battery Production for EV/HEVs that will be held from...
The launch meeting for the ECO-PROTECT project, “Development of an ECO-friendly PROTECTion for aerospace aluminium...
With its new installations, CIDETEC bolsters its position as a reference institution in surface engineering innovation and development.
The meeting to close the SEALANT project, “Optimisation of the sealing process in sulphuric acid anodising treatments...
Organised by CIDETEC and the Regional Council of Gipuzkoa, STARTNOW provided an integrated view of the possibilities that...
Last 14 June, CIDETEC Surface Engineering visited the Autonomous University of Barcelona (UAB), more specifically the Smart...
The event included EAST FORUM 2018, the annual meeting of the European Academy of Surface Technology. Organised by CIDETEC...
On 19th and 20th of June, CIDETEC Surface Engineering hosted the CARBODY collaborative workshop between Mat4Rail...
The Provincial Council of Gipuzkoa and CIDETEC Energy Storage organize the STARTNOW congress on the 4th and 5th of July at...
Eduardo Junkera and Javier Rodríguez, president and director of CIDETECrespectively, met on 14 June with the president...
The manufacturer of semi-finished chemical products for surface treatment visited the new facilities on 25 May for the purpose...
The past 14th of May the opening of the biannual 2018 Spring edition of the Baltic Conference Series (BCS) was celebrated,...
The CIDETEC Foundation sees its main governing body reinforced with the incorporation of two new trustees, who will be joining...
Dr. Timothy Hall, researcher at the American company Faraday Technology, visited CIDETEC Surface Engineering's new facilities on 21 May.
A delegation composed of members of the European Parliament, their assistants and ALDE staff members, visited CIDETEC on 22 May.
LIEBHERR-AEROSPACE Lindenberg GmbH visited CIDETEC Surface Engineering for the launching of the ECOLAND project, “Development...
Next 16 and 19 April, Vienna will host the prestigious TRA 2018 Conference with the support of the European Commission and...
Eric Santkin, Economic and Commercial Councillor of Wallonia, visited CIDETEC Surface Engineering installations last 15 March.
In the framework of a joint research study with Argonne National Laboratory (USA) and Mercedes Benz R&D North America,...
CIDETEC Energy Storage played an outstanding role in two strategic battery events held in Brussels in January under the auspices...
INNPAPER project partners met in San Sebastián on 17 and 18 January to coordinate the first steps for this three-and-a-halfyear-long...
CIDETEC Surface Engineering participated in the Bio-based Industries (BBI) Stakeholder Forum held last 6th and 7th of December in Brussels.
The conference, organized by Plastics News Europe, was focused on the newest automotive interior and electronics innovations.
CIDETEC hosts the final meeting of the CATSENSE Network Supervisory Board The final meeting of the CATSENSE Initial Training...
The 2017 edition of Eurosurfas, held in Barcelona from 2 to 6 October, occupied over 2,000 m2with 62 exhibitors, who...
CIDETEC strengthens its position in the aeronautic sector with the NADCAP non-destructive testing (NDT) accreditation. This...
CIDETEC Nanomedicine participates in the annual conference of the European Technology Platform on Nanomedicine (ETPN) The...
MARS-EV, standing for “Materials for Ageing Resistant energy Storage for the Electric Vehicle” has celebrated...
iModBatt Project launched iModBatt, standing for “Industrial Modular Battery Pack Concept Addressing High Energy...
The regular meeting to monitor the LORCENIS Project was held at the installations of the Scientific and Technological Park...
From 4th-5th October 2017, CIDETEC has hosted the Mat4Rail Kick-off meeting in San Sebastián, a project funded through...
KaRMA2020 was awarded as the more inSPIRE-ing project in the pitching session “Valorisation of different energy sources/Adaptable...
CIDETEC faces the new era of Nanomedicine More than two decades of intensive basic research on nanomedicine has generated...
Damien Dupin has attended the 28th annual conference of the European Society for Biomaterials organised in Athens (Greece) on September 4th-8th.
CIDETEC's strategy for the development of advanced electric battery technologies has received solid support from the European...
Web: www.cidetec.es/2wtn The event will be held on the 18th and 19th of September in the Technological Park of San Sebastián.
Energy Storage is called to play a fundamental role in energy transition towards a sustainable economic model, a transition...
The PneumoNP project, focused on the development of theragnostic systems for the treatment of resistant pneumonia, faces...
At the facilities of the Technology Park of San Sebastián, CIDETEC will be organizing the 2018 edition of the SMT...
The event took place in Valletta (Malta) between 21 and 23 June and brought together the main continental stakeholders involved...
La ciudad vasca de San Sebastián ha acogido la reunión inaugural del proyecto europeo ECOXY "Compuestos EpOXY...
The osteolysis generated by the small fragments released due to wear is the main cause of failure in long-term joint prostheses.
The meeting brought together representatives of the European eCAIMAN, SPICY and FIVE VB projects in Vienna. CIDETEC participated...
The president of the panel evaluating the candidates, Dr. Iluminada Gallardo, has announced the ruling of the awards for the 2016 edition.
On the 20th, 21st and 22nd March, CIDETEC, in collaboration with Tecnalia, hosted a series of meetings of the Energy Storage...
On February 15, Nature Communications published the article that contains the results of the research carried out by researchers...
BATTERY JAPAN is the main international exhibition in the field of rechargeable batteries and in particular of lithium ion...
The launch of the HAZITEK Project FUNCONA4 took place on the 9th of February at the ORBEA facilities in Mallabia: Products...
A total of 75 European experts met on 23 and 24 February in Brussels on the occasion of two important events related to new...
INTEGRAL is an Innovation Action project coordinated by CEA within the PILOTS-01-2016 call of the Horizon 2020 Framework Programme.
The course was held in Zaragoza from 16 to 20 January and was attended by a dozen European experts.CIDETEC was represented...
The provincial institution and the technology centre join forces to place Gipuzkoa among the most advanced territories in...
The CIDETEC Awards are intended to promote scientific study, technological development and industrial innovation in all types...
Works are starting on the grounds where the headquarters of the Surface Engineering area of CIDETEC will be built.The building...
Basque Television ETB 's Teknopolis programme of 19 and 20 November showed a report on batteries in which CIDETEC's department...
The objective of RECYSITE is to produce fully recyclable and reusable green composites based on bioresins and natural fibres.
CIDETEC reaffirmed its commitment to the city through participating in various events of the Donostia WeekINN program, within...
The European Automotive Research Partners Association (EARPA) organized the event held at the EGG Conference Centre in Brussels...
AETP 2016 was held in Madrid on October 20 and was sponsored by CIDETEC, thus forming part of the group of major companies...
The event took place on September 28 and revolved around the development of nanomedicine and the main challenges posed by...
CIDETEC researchers took part in the recent event "The Battery Show" held in Novi, Michigan, between 13 and 15 September.
This recognition takes place within the framework of the Peer Review Week, that on the subject of Recognition for Review...
Dr Inmaculada Ortiz Uribe and Dr. Eduardo Laborda Ochando, winners of the XII CIDETEC awards, received from Dr. Vicente Montiel...
CIDETEC is part of the consortium that is developing the SEALANT project, 'Optimisation by experimental design and industrial-scale...
PneumoNP is a collaborative project funded under the 7th Framework Programme of the European Commission aimed at the development...
The seminar on Advanced Composites for the Automotive sector, organized by CIDETEC and AIMPLAS technology centres, brought...
The aim of the project is to develop best-of-its-class bipolar plates for automotive stacks with superior corrosion resistance...
The science magazine discusses the advantages of the new material developed by the Polymer and Composite Unit.The publication...
Under the European project PneumoNP, led by CIDETEC, a workshop on bacterial resistance to antibiotics and the new technologies...
CIDETEC and AIMPLAS will review the opportunities offered by the automotive and transportation sectors regarding new composites...
The Jury of the CIDETEC 2014 Awards, at a meeting held last April decided: 1) Grant the CIDETEC 2014...
On behalf of CIDETEC, Virginia Ruiz received the oar that symbolises the teamwork under which the project took place.The...
The Jury of the CIDETEC 2015 Awards is pleased to announce: 1) The award of the 2015 CIDETEC prize for the modality of "Scientific...
The symposium will take place during the autumn meeting of the EMRS. During the coming September, a symposium on materials...
KERA-COAT presented its latest developments at the NACE-Corrosion 2016 International Conference, a key meeting point for...
CIDETEC presented their latest developments and applications of 3R technology (Reprocessable, Recyclable and Repairable thermostable...
A research produced entirely in the Basque Country between Polymat, Ikerbasque and CIDETEC and financed by the Basque Government,...
CIDETEC will attend the JEC World 2016, to be held from 08 to 10 March in Paris With over 100 countries attending, and...
The European project GREENLION “Advanced Manufacturing Processes for Low Cost Greener Li-ion Batteries” reached...
CIDETEC is taking part in the European ECOGEL CRONOS project, with the aim of obtaining a new high productivity composite...
The awards, which recognise excellence in the field of electrochemistry, are given in two categories: Scientific Research...
CIDETEC and Biodonostia have organised an event aimed at discussing the consequences of the misuse and abuse in the consumption...
A collaboration agreement was signed on 10 November by José M. Asua, director of POLYMAT Fundazioa, the Basque...
CATEC hosted the final meeting of the INLIGHT project on 29 October CIDETEC has been coordinating Europe’s INLIGHT...
The final meeting of the GREENLION project was an opportunity to present the important technical milestones reached by the...
The founder and president of Egile Corporation XXI, Eduardo Junquera Pérez, was named the Best Basque Entrepreneur...
Representatives of the European project PeptiCaps gather to hold the project’s launch meeting On 6 October 2015, the...
Outstanding participation of CIDETEC at the ABBAA international conference for experts in automotive batteries The 8th ABAA,...
CIDETEC organises a workshop on advanced batteries in the context of the closing of GREENLION, an EU-funded project The...
Iñaki Aranburu, Chairman of IK4-IKERLAN, has been appointed as the new chairman of IK4 now that Jesús María...
Dr. ENRIQUE BRILLAS COSO and Dr. ÁLVARO COLINA SANTAMARÍA, winners of the XI CIDETEC awards, received their...
President of the Basque Country Iñigo Urkullu visits the CIDETEC facilities for a first-hand look at the centre’s...
From harmonized fuel cell stack testing to standardization Harmonized European test procedures are the first step in getting...
CIDETEC will be speaking at the Technical Conference on Pre-treatments and Industrial Finishes. On Wednesday 27 May, as...
AIMPLAS, Technological Institute of Plastics and CIDETEC have signed a collaboration agreement for R&D+i in nanotechnology and polymers.
A research paper written by the researchers from CIDETEC is selected for the front cover of the journal ChemElectroChem due...
The ECLIPSE project, in which algae biomass waste-derived materials have been developed comes to an end, having successfully...
In the frame of the main European event on nanotechnology, CIDETEC will present the Project of the first plant in Europe...
The use of chemometric methods to study and optimise pulse electrodeposition processes is one of the innovations of the paper In...
Both entities will work together in the research development within the field of Electrochemistry The President of the University...
Deusto Business School brings together industry leaders to discuss the future of renewable energy Deusto Business School has...
The research paper will be included in a special collection of studies on energy generation and conversion at micro and nano...
NANOPILOT project members meet at CIDETEC to celebrate the project’s launch The official meeting to launch the NanoPilot...
On 28 November, the meeting of the CIDETEC Foundation’s Board of Trustees was held on the premises of DMP in Mendaro,...
CIDETEC presented its capabilities and latest developments at the 9th edition of the aviation industry’s leading trade...
Three European projects enter the finalisation stage of their EU Grant Agreements, driving forward the implementation of the ETPN Translation Hub.
CIDETEC be present at the 9th edition of AIRTEC, a reference fair in the aerospace industry, to be held in Frankfurt from 28 to 30 October 2014.
INTERACT project representatives meet in CIDETEC to hold a technical meeting after the first year following the beginning of the proyect.
CIDETEC is holding the Batteries and Fuel Cells Seminar in collaboration with the prestigious expert Shmuel De-Leon. The...
CIDETEC will participate as a speaker in the second edition of the technical seminar 'Energy Storage: technologies and projects”...
Donostia will be host to an Intellectual Property Training Event, to be held at CIDETEC Headquarters on the 19th September, 2014.
Donostia will be host to the fifth edition of the VISIO Conference, to be held at Basque Culinary Center on the 16th and 17th of October, 2014.
Dr. Francisco José Vidal Iglesias and Dra. Nuria García-Aráez García del Valle, winners of the...
In collaboration with CIDETEC and RESCOLL Société de Recherche, Helmholz Institute Ulm is organizing the GREENLION...
Within the ORION project, a new family of materials has been developed combining inorganic nanomaterials and ionic liquids...
BYEFOULING project representatives met at CIDETEC to present the results of the first stage of the project On the 27th and...
CIDETEC is taking part in the European project DeMStack focused on the improvement of electrocatalysts and membrane electrode...
CIDETEC and AIAS are organizing a Technical Seminar on Tribological Coatings during BIEMH 2014 Exhibition. As part of the...
The CIDETEC jury awards 2013 were held on April at CIDETEC. The jury members decided to award: 1) Dr. FRANCISCO...
CIDETEC has taken another step in positioning itself as a centre of reference in Advanced Materials with the recent opening...
CIDETEC is attending the European Industrial Technologies event from the 8th to the 11th of April. At the fair, new developments...
CIDETEC participates in the European project INTERACT that is aimed at developing new materials and processes for carbon...
CIDETEC takes part in the European project ECOGELCRONOS in order to obtain a new manufacturing process for composites (or...
CIDETEC will be present at the JEC Europe from 11 to 13 March, one of the most important fairs in the world in the field of composite materials.
CIDETEC takes part in the European Project BYEFOULING focused on high volume production of low toxic and environmentally...
CIDETEC leads the European consortium to fight antibiotic-resistant bacterial infections. Ø The 6 million euro...
With the help of an expert group of editors, Chemistry World magazine has compiled a list of the discoveries of chemistry...
See more